How to respond and end PSTN calls from V5.2 - LE side

Connecting the unit and setting the test conditions:

The connections of Clarinet-Book USB units and the settings of test conditions for a basic monitoring are detailed in the following pages:

The basic profile resulting from the wizard allows to simulate a V5 LE equipment.

Responding continuously to PSTN calls only

The V5 responder can be configured to reply continuously an infinite value:

  • edit the profile resulting from wizard (v52_simu_le_e1_pri.acp as an example)
  • TAB [General]: remove the value of Minimum Duration (an empty filed means "infinite")
  • TAB [Clarinet 1]:
    • deselect the [ISDN User port User Port Provisionned ]
    • deselect the [PSTN User port Signalling Behavior]è GeneratorèPort2è select

Saving the profile under a new name:

  • ProfileèSave asèfilename.acp.

Auto clearing incoming calls from V5.2 LE side

By default, all the incoming calls are disconnected from the AN side

The responder can be configured to clear the PSTN calls launched from the AN side by selecting in TAB [Clarinet 1]:

  • edit the profile resulting from wizard (v52_simu_le_e1_pri.acp as an example)
  • go to [PSTN User port Signalling Behavior]è[Responder Common Behaviour]è[1.3 end of exchange]
    • set a value of n seconds in after n sec Send SIGNAL...
    • select the option ü Send SIGNAL...
    • configure the message SIGNAL...

Save the profile under a new name:

  • ProfileèSave asèfilename.acp.

Manually clearing incoming calls from V5.2 LE side

The responder can be configured to clear the PSTN calls launched from the AN side by selecting in TAB [Clarinet 1]:

  • edit the profile resulting from wizard (v52_simu_le_e1_pri.acp as an example)
  • go to [PSTN User port Signalling Behavior]è
    • no value in after sec Send SIGNAL...
    • select the option ü Send SIGNAL...
    • configure the message SIGNAL...

  • Save the profile under a new name:

    • ProfileèSave asèfilename.acp.
  • launch the execution of the profile
  • go to the manual command area of the manager:
    • Clarinet1èSL-V5-xèPSTN Clear all
    • Clarinet1èSL-V5-xèPSTN Clear [Port Address= ]

 

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04