ATM VCC
Usage. for the current VCC:
AAL type. and relevant parameters of the panel are used.
PDU max length. for the VCC receive connection.
Cell header. used for each ATM cell for the VCC. (transmit and
receive connections)
- GFC. Binary value. x for mask use in monitoring.
- VPI. Decimal value.
- VCI. Decimal value.
- Set CLP bit
 Yes.
The CLP bit is set to 1. No.
The CLP bit is set to 0.
Rate mode. (for the VCC transmit connection)
- VBR. The attached I and L GCRA parameters will be in use.
- Increment. Values according to ATM UNI 3.1
Generic Cell Rate Algorithm specifications, and defined in cell slots +
thousands (max 16383.999).
- UBR. see specifications.
AAL 3/4. parameters for the current VCC, if this AAL type is used:
- Enable CRC10 field checking. (receive connection)
-
Yes
- No
- Enable BASIZE checking. (receive connection)
-
Yes
- No
- Significant bits for MID field. (receive connection)
- MID processing disabled
- 1 active bits
- ...
- 10 active bits (1-1023)
- MID value. (transmit and receive connections)
- CPI value. (transmit connection)
- Initial SN. (transmit connection)
AAL 5. parameters for the current VCC, if this AAL type is used:
- UU value. (transmit connection)
| 