|
| |
Filter editor: U decoding
Selecting
- All. All the conditions are selected.
- None. None of the conditions is selected.
- Power source i (1 or 2). Validation of selecting conditions on all
events relating to Power source i (1 or 2).
 No.
There is not any selected conditions used on the related events. Yes.
There can be selected conditions used on the related events.
- TE/NT states. Validation of selecting conditions on all events
relating to either TE or NT states.
- No.
There is not any selected conditions used on the related events.
- Yes.
There can be selected conditions used on the related events.
- TE/NT M4 bits. Validation of selecting conditions on events
relating to either NT or LT M4 bits.
- No.
There is not any selected conditions used on the related events.
- Yes.
There can be selected conditions used on the related events.
- Conditions. One condition or several ones can be independently
selected in the list, but according to the current validations of Power
source 1/2, NT/LT states and NT/LT M4 bits.
- No.
The condition is not selected (by default).
- Yes.
The condition is selected.
List of conditions
- Power source i (1 or 2). Selecting conditions on events reporting a
state modification on Power source i (1 or 2).
- Don't care. Any modification.
- Not monitored
- Off. Modification to Off state.
- On. Modification to On state.
- Inverted. Modification to Inverted state.
- NT /LT states. Selecting conditions on events reporting a
modification of the NT /LT state.
- Don't care. Any modification of the NT /LT state.
- Idle. Modification to the Idle state.
- Activated. Modification to the Activated state.
- Synchronized. Modification to the Synchronized state.
- NT /LT M4 bits
- M4 bit. Modification of the related M4 bit.
|
