Filter editor: LCN value
Selecting conditions
can be defined by value(s ). See features.
Counting specifications ( for Statistics )
can be defined by value(s ). See features.
Their use is based on the following rules:
- The different selecting conditions in the panel are exclusive.
- The auto mode is not available within a Display action (or Counter
specifications).
LCN Value. A value condition can be directly edited in either decimal
mode or binary form (0, 1 and x for mask use).
-
 Yes. The
value condition is selected.
 No. The
value condition is not selected.
LCN Auto
A value condition can be indirectly defined.
- Yes.
The auto value condition is selected.
- No.
The auto value condition is not selected.
The value of the LCN to be used as a selecting condition is automatically
determined from the monitoring of the protocol sequence upon recognition of a
matching packet type with a Called/Calling address or a Facilities/User data
content.
- Packet.
Access to the choice list of the packet types of the protocol layer. A packet
type MUST be selected.
- Called address.
Value in digits.
The Called/Calling address and the Facilities/User data content are linked
with a logical OR operation.
- Calling address.
Value in digits.
The Called/Calling address and the Facilities/User data content are linked
with a logical OR operation.
- Facilities.
- User data Ascii...
Edition in ASCII mode of a selecting string of bytes which must be a partial or
the full content of the Facilities/User data of the selecting packet.
The Called/Calling address and the Facilities/User data content are linked
with a logical OR operation.
- User data Hexa...
Edition in hexadecimal mode of a selecting string of bytes which must be a
partial or the full content of the Facilities/User data of the selecting packet.
The Called/Calling address and the Facilities/User data content are linked
with a logical OR operation.
When the matching condition occurs:
- Only the packets with the related LCN value will be selected until the
last one ending the call.
- The automatic recognition becomes inactive until the last packet
ending the call.
| 