|
| |
IP/RTP profile editor: RTP/RTCP simulator
Connection properties
RTP parameters
- Packet duration. in ms, between 2 and 100.
- Payload type.
Automatically fixed in case of standard encoding specifications of the
Network codec. Otherwise to be manually set.
Network Codec. For selecting the encoding specifications of the RTP
data flow.
RTCP parameters
- SDES items... Access to editing the
content of some fields of the Source description RTCP packets (conveying
information about the participants in an on-going session).
Active state
Tx Data source. For data to be sent:
- Source selection. For some data source type, a complementary selection
must be done.
- Transmission mode. of the data source.
Rx Data source. For data to be received:
- Source selection. For some data source type, a complementary selection
must be done.
- Limit Rx file size. In use only with active source defined as Receive
file.
 No.
no size limit. Yes.
The following Max size parameter is used.
- Max size. In use only with active source defined as Receive
file.
The received data are no more recorded in the Rx File after this size is reached.
An empty field means an infinite size value.
Time duration depending on the transmission/reception mode:
- Wait after end. Supplementary delay after a fixed limit. When it
expires, the connection is
automatically closed.
An empty field means an infinite value of time.
- otherwise Data state duration. Connection duration. The connection is automatically closed when
this duration expires.
An empty field means an infinite value of time.
|
