|
| |
IP profile editor: Protocol stacks
Protocol layer items. A set of significant buttons are displayed in the left side of
the panel..
According to the current state of the IP protocol stack:
- Some of them are displayed available for selection (Button Off), and can
be selected to be added at the top of the protocol stack by the Add
button.
- The others cannot be used.
Protocol Stack. From the current state, the protocol stack can be
modified to include more or less layers by adding (Add button) or
removing (Remove button) them at the top position.
Add. To add an available protocol layer item at the top of the
protocol stack.
Remove. To remove the protocol top layer from the protocol stack.
IP profile selection status.
They are different types of protocol stacks available according to the used
Clarinet interface type:
- IP over Ethernet. on Clarinet LAN (Ethernet AUI, 10B2, 10BT), and
based on MAC IEEE 802.3 frames.
- IP over V120. on Clarinet ISDN (E1, T1, U, S/T with ISDN protocols or
Trunk E1/T1), and based on V120 frames in a bearer channel.
- IP over PPP. based on PPP frames in a bearer channel.
on Clarinet ISDN (E1, T1, U, S/T with ISDN protocols or
Trunk E1/T1) or Clarinet Vseries, and Clarinet ADSL.
- IP over ATM. on Clarinet ATM (E3 and STM1/STS3c).
|
