IP profile editor: SIP Responder

Incoming calls behaviour. 

  • If find condition 1 or find condition 2 then accept call. Conditions are given patterns in any field of the SIP message header.
  • then
  • accept call.
  • send Status Error... Message transmission.
    Access to editing the message content.
    •


Incoming call accepted

Call establishment. with the following steps in sequence:

  • Send -i. Validation of the message number i.

    • No. The current message is not validated and will not be sent.
    • Yes. The current message is validated and will be sent in sequence.

Status xx.... Message number i in the sequence.
Access to editing the message content.

  • After duration. Delay before sending the Status Success message or the Status Error message.
    An empty field means an infinite value of time.
    • if available resource then send Status Success... Message transmission.
      Access to editing the message content.
    • else send Status Error... Message transmission.
      Access to editing the message content.

Call active. With the specification of the active source to be connected and  the transmission mode resulting in duration parameters.

  • Active source. Data source to be connected:
    • None. No data source.
    • RTP Simulator. An RTP profile must be selected from a choice list.
    • PESQ. Wav file selected from a choice list.
      PESQ measurement is carried out on the Tx/Rx RTP data flows at the end of the profile execution according to the following settings:
      • Analog properties (with Auto mode) set in the Protocol filter defined within the profile.
      • configuration file set as WI_ANALOG by Clarinet-Init
  • Transmission mode.
    • Send continuously for a duration. The call is automatically cleared when the duration expires.
      An empty field means an infinite value of time.
    • Send number of time(s) and clear after delay. The selected data source is transmitted, for the number of times as defined. And then, after the delay expiry, the call is automatically cleared.
      An empty field means an infinite value of the delay.

Call clearing. with the following step in sequence:

  • Send BYE... or Status Success... Message transmission, depending on which party clears the call.
    Access to editing the message content.

 

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04