E1/T1 (Trunk/ISDN/QSIG/SS7)
& ISDN-BRI Interface specifications
- TRANSDATA
Emulation mode. Behaviour on the Transdata interface:
- Simulation. Setting up an external data-sink-source in connection with some selected TS's of the
current BRI-PRI interface:
- some TS's of the INPUT direction will be switched to the R output circuit of Transdata.
- the T input circuit of transdata will be switched to some TS's of the OUTPUT direction.
- Analysis. Setting up a data output interface in connection with some selected TS's of the
current BRI-PRI interface:
- some TS's of the Network/NT input of the current interface will be switched to the R
output circuit of Transdata.
- some TS's of the User/TE input of the current interface will be switched to the T output
circuit of Transdata.
Channel
specification. Allotment of a TS or a set of TS's of the
current interface.
The number of TS's must be identical in both directions.
- T time-slot(s). Selection of the TS's which are permanently connected
to the T circuit of Transdata.
- R time-slot(s). Selection of the TS's which are permanently connected
to the R circuit of Transdata.
-
- Related topic:
- TRANSDATA connection
| 