Profile Editor: V5.x specifications

V5 interface type. Selection of the physical interface type.

  • V5.1. Clarinet supports V5.1 interface
  • V5.2. Clarinet supports V5.2 interface.
    Allows to configure 'Multi-clarinet' in simulation mode.
  • Emulation Mode. The behaviour of the Clarinet V5x interface.

  • Monitor. Clarinet analyse the both directions of the interface between AN-LE
  • AN. Clarinet emulates the Adapter Network
  • LE. Clarinet emulates the Local Exchange
  • V5 edition. According to the edition of the ETSI standards.

  • Edition 1
  • ETS 300 324 for V5.1 : published feb. 94, amended jan. 96.
  • ETS 300 347 for V5.2 : published sept 94, amended may 97.
  • Edition 2
  • ETS 300 324 for V5.1 : published dec. 99.
  • ETS 300 347 for V5.2 : published jan 00.
  • Interface spec... Configuration of the physical (E1 Links) and logical (C-channels) interfaces.

    Emulator config... Specification of the parameters and options of the V5 protocol when Clarinet emulates a AN or LE.

    ISDN User-Port. ISDN configuration and behaviour of the ISDN Call simulation :

    • Provisionned
      • Yes. One ISDN User Port is specified as provisioned.
      • No. No ISDN User Port is provisioned.
    • ISDN type
      • Basic access. The ISDN User Port emulates a BRI access
      • Primary access. The ISDN User Port emulates a PRI access
    • User Port Address. Value in decimal.
    • National Implementation of ISDN Q931
      • ETSI Basic, . ETSI Specification ETS 300 403-7
    • Emulator config... Specification of the parameters of the ISDN Signalling protocols (Q921, Q931) when Clarinet emulates a AN or LE.
    • Signalling Behaviour Configuration of the ISDN Simulation defined by an automatic simulator.

    PSTN User Ports. PSTN configuration and behaviour of the PSTN Call simulation :

    • Emulator config... Specification of the parameters and options of the PSTN Signalling protocols when Clarinet emulates a AN or LE.
    • Signalling Behaviour Configuration of the PSTN Simulation defined by an automatic simulator.
      • No. The simulator behaviour is de-activated.
      • Yes. The simulator behaviour is activated.

    Signalling Behaviour. Configuration of a programmable simulation.

    • User Program. The simulation behaviour is carried out by the execution of a user-developed program in C language.
    • TTCN User Program. Simulation defined by an Executable Test Suites resulting from TTCN compilation

     


    home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

    updated:  27-Feb-04