QSIG signalling behaviour: Responder

Note: The items marked (emu) are relevant to the QSIG emulator behaviour.

Accept incoming calls (emu). Configuration of the Responder behaviour.

  • No. The incoming call are rejected.
  • Yes. The incoming calls are accepted.
    •


    Incoming call rejected

    Call clearing (emu). With the following step in sequence:


    Incoming call accepted

    Call establishment. With the following steps in sequence:

  • Send message. Validation of the transmission of the related message.
    • No. The message will not be sent.
    • Yes. The message will be sent in sequence.
  • Send SETUP ACK... (emu) Message transmission if validation and if needed.
    Access to editing the attached buffer of IE(s).
  • Send CALL PROC... (emu) Message transmission if validation.
    Access to editing the attached buffer of IE(s).
  • Send ALERTING... (emu) Message transmission if validation.
    Access to editing the attached buffer of IE(s).
  • Send PROGRESS... (emu) when entering state. Access to editing the attached buffer of IE(s).
    Message transmission if validation and when entering the selected state.
  • 7. Call received
  • 9. Incoming call proceeded
  • 10. Active
  • 25. Overlap receiving
    •
  • Delay before CONNECT. Delay before sending the CONNECT message (if to be sent), starting from the reception of the incoming SETUP message.
    An empty field means an infinite value of time.
    If the Outgoing call active source is used, the delay is before the generation of the outgoing SETUP.
  • Send CONNECT... Message transmission after delay.
    Access to editing the attached buffer of IE(s).
    •

    Active state. With the specification of the source to be connected and the duration.

    • Connect... active source. Source to be connected in the switched B channel(s) during the active state of the communication:
    • Data state duration. If this duration expires, the call is automatically cleared.
      An empty field means an infinite value of time.

    Call clearing. With the following steps in sequence:

    • If normal clearing, Send DISC/RELEASE. Message transmission, depending on which party clears the call.
      Access to editing the IE buffer attached to the DISCONNECT message.
    • If resource unavailable, Send DISC/RELEASE. Message transmission if resource unavailable (as channel or data source).
      Access to editing the attached buffer of IE(s).


    Copy/Paste functions

    The Copy QSIG IE buffer and Paste QSIG IE buffer functions allow to duplicate the contents of a particular message to an other one (in the same profile or a different one).

     

    home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

    updated:  27-Feb-04