Manual commands: Sending characters on Vseries
Manual commands. The SL/DL Sequence
simulation commands can be used if the profile includes specifications of Asynchronous or
BOP link type for the Signalling Link, Data Link.
Sequence. of bytes which are transmitted.
The delimiter characters defined in the End
of strings specification are added in the sequence of asynchronous characters.
Hexa. To select edition mode :
 No. For editing the sequence of bytes in ASCII mode. Yes.
For editing the the sequence of bytes in hexadecimal.
OK. According to the command context (SL/DL
Asynchronous or BOP link type), this command causes the transmission of the byte sequence
only in the corresponding state of the interface (depending on the combination of states
of circuits).
| 