Manual commands: Setting PRI E1 alarms

run_e1_alarm.jpg (25626 octets)

Alarm type. The type of the operated alarm MUST be selected in the choice list :

  • FL. Loss of frame alignment. PVT in french.
  • AL. Alarm indication to the remote end. PVTd in french.
  • AIS. Alarm indication signal. SIA in french..
  • M-FL. Loss of multi-frame alignment (abcd signalling). PVMT in french.
  • M-AL. Alarm indication to the remote end (abcd signalling). PVMTd in french.
  • Sa7. State of the Sa7 bit.
    •

    Alarm. The command causes the detection of an alarm of the related type going On by the peer entity connected to the Clarinet interface.

    Normal. The command causes the detection of an alarm of the related type going Off by the peer entity connected to the Clarinet interface.

     

    home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

    updated:  27-Feb-04