Vseries Interface specifications - SIGNALLING LINK
Common specifications
Data link
type. Structure of data used to record the events monitored
on SL, during the Signalling state of the interface.
In simulation mode, data type or data source used on SL.
Data type selected from a choice list:
- None. No SL.
- BOP. Bit Oriented Protocol. The standard HDLC frame envelope mode.
- Asynchronous. Asynchronous characters.
Inverted polarity
 No. Normal polarity of the physical signal. Yes.
Inverted polarity of the physical signal.
If BOP selection
NRZI data encoding
- No. NRZ data coding type at the physical layer.
- Yes.
NRZI data coding type at the physical layer.
If Asynchronous selection
Baud rate on Tx. The Tx clock value in synchronous mode can be selected
from a choice list, or manually entered.
The actual value will be set according to the hardware capabilities.
Baud rate on Rx. The Rx clock value in synchronous mode can be selected
from a choice list, or manually entered.
The actual value will be set according to the hardware capabilities.
Bits of data. Selected from a choice list:
Stop bits. Selected from a choice list:
Parity. Selected from a choice list:
End of strings. Edition of a series of delimiter characters which
end a string of characters:
This specification is used for recording the monitored asynchronous events (string
events), and for transmission of a sequence of characters.
| 