Hardware installation: Clarinet-Book

Clarinet-Book USB configuration

The Clarinet-Book USB hardware is made up of one or several modules, each connected to the Host PC through the USB interface and optionally powered on by an external power supply unit (if the power supply is not directly provided by the USB connection). A set of batteries is normally inserted in the Clarinet-Book USB unit.

One Host PC can simultaneously drive several Clarinet-Book USB units. Each module uses one address (ID from 1 to 7), set by the coding wheel. All the values must be different.

Clarinet-Book SCSI configuration

The Clarinet-Book SCSI hardware is made up of one or several external units powered on by their individual power supply unit and connected to the Host PC by a SCSI-2 interface (a SCSI cable is provided with each Clarinet-Book SCSI module):

  • Each module has two SCSI connectors for the daisy chain connection.
  • One SCSI terminator ( provided with each Clarinet-book SCSI module) must be plugged on the last module.

One Host PC can simultaneously support several (up to 6) Clarinet-Book SCSI modules. Each module uses one address on the SCSI bus: the CLARINET-ID.
The coding wheel on each module sets the address (from 1 to 6). All the values must be different.

Clarinet-Book ATM

When several Clarinet-Book are used with at least one of ATM type, the interface number 1 (coding wheel on position 1) must be of ATM type.

 

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04