How to modify the SETUP of H323 simulation over Ethernet

This page describes the way to configure the SETUP message when simulating an H323 End-Point with the following features:

• connection to an Ethernet network
• registration from a Gatekeeper by using H225-RAS
• establishment of signalling channels by using H225
• establishment of media channels by using H245

Connecting the unit and setting the test conditions

The connections of Clarinet-Book USB units and the settings of test conditions for a basic H323 communication using the H245 procedures are detailed in the following pages:

• Howto simulate H323 Endpoint
• Howto simulate H323 Endpoint in Fastart mode

Changing the SETUP content of Outgoing calls

Profile H323_simu_mac_endpoint_RAS.aip  needs to have some modifications of the default addresses: 

• Open the profile:
  • ProfileèOpen IP...èH323_simu_mac_endpoint_RAS.aip.

• Modifications of the  SETUP  messages used by the H323 Endpoint :

  • Adding more IE in the SETUP (Called Party number as an example)
    Generator èH323Destination1 èEdit èSetup èNoneèCalled Party Number èCoding 
  • The following field should be configured:
    • Type of number:
    • Numbering Plan
    • Number Digits:
• Save the profile under a new name:
  • ProfileèSave asèfilename.aip.
• Select this new name in the LAN profile and save it.
  • ProfileèSave asèfilename.acp.

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04