How to monitor Frame-Relay or X25 over Vseries interfaces

Connecting the unit

The Clarinet Book USB Vseries uses serial or parallel mode to connect.
See 'How to connect Vseries interface to Clarinet-Book USB' 

Setting the test conditions for Vseries monitoring

A new profile can be created with the Wizard from the Template list by selecting:

  • Profile->New->Vseries......See: building
  • Profile with a description including Vseries, Monitor, PH=V24 DL=BOP
  • Filter with a description including one of the options:
    • DL=BOP
    • DL=Frame Relay
    • DL=X25

Profile resulting from the wizard is ready for BOP monitoring on a V24 interface.

Example: Modifications to support V24 interface with 113/115 clocks

By default the 114/115 mode is selected (two clocks coming from DCE). The 113/115 mode corresponds to one clock coming from DCE and one clock coming from DTE

In the profile access to  Interface-Spec... ->Physical level :

  • Terminal clocks: select 113/115

For information: the clock value is not significant (automatically extracted) in this monitoring mode

Example: Modifications to support X24/V11 interface with X/S clocks

In the profile access to  Interface-Spec... ->Physical level :

  • Interface type:  select X24
  • Terminal clocks: select X/S

For information: the clock value is not significant (automatically extracted) in this monitoring mode

Example: Modifications to support V35 interface with 114/115 clocks

In the profile access to  Interface-Spec... ->Physical level :

  • Interface type:  select V35
  • Terminal clocks: select 114/115

For information: the clock value is not significant (automatically extracted) in this monitoring mode

Example: Modifications to support V36 interface with 114/115 clocks

In the profile access to  Interface-Spec... ->Physical level :

  • Interface type:  select V36
  • Terminal clocks: select 114/115

For information: the clock value is not significant (automatically extracted) in this monitoring mode

Running the profile

To launch the profile:

  • Select Profile->Run or click over horse_on.gif (968 octets) . It allows to select the name of profile. See Running a test
  • The windows of the Event-Editor is automatically opened.

To stop the profile

  • Click over horse_off.gif (975 octets)  See: Stopping a test
  • The window of the Event-Editor is automatically close

Clock frequency measurement

During profile execution, the Clock manual command causes the measurement of the clock frequency of the Data link.

 

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04