How to monitor PPP and IP over Vseries interfaces

Connecting the unit

The Clarinet Book USB Vseries uses serial or parallel mode to connect.
See 'How to connect Vseries interface to Clarinet-Book USB' 

Setting the test conditions for Vseries monitoring

A new profile can be created  with the Wizard from the Template list by selecting:

• Profile->New->Vseries......See: building
• Profile with a description including Vseries, Monitor, PH=V24 DL=Asyn
• Filter with a description including DL=Asyn-PPP

Profile resulting from the wizard is ready for Asynchronous monitoring on a V24 interface.

Example: Modifications to support V24 interface at 38400 bits/s

By default the clock value is 9600 bit/s

In the profile access to  Interface-Spec... ->Data Link :

• Baud rate on Tx: select or enter 38400
• Baud rate on Rx: select or enter 38400

Any Baud Rate value can be entered directly in these fields.

Running the profile

To launch the profile:

• Select Profile->Run or click over . It allows to select the name of profile. See Running a test
• The windows of the Event-Editor is automatically opened.

To stop the profile

• Click over   See: Stopping a test
• The window of the Event-Editor is automatically close

Clock frequency measurement

During profile execution, the Clock manual command causes the measurement of the clock frequency of the Data link.

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04