|
| |
Filter editor protocol:
Action specification
Selecting conditions. The date/time conditions and the
conditions on event types must be simultaneously fulfilled; they are linked with
a logical AND operation.
Date/Time. For selecting conditions on Date/Time.
 Yes. The date/time
conditions are applied. No. There is not any
condition to be applied according to date/time.- Edit... To define a range of date/time,
and the events whose date/time value is within the range are selected.
Event types. For selecting conditions on event types and according to
a pre-defined set of used Clarinet interface(s).
- No. There is not any
selecting condition to be applied according to Filter set number, System and
Protocol event types.
- Yes. The conditions related
to Filter set, System and Protocol event types are applied.
- Filter set 1. The conditions related to System and Protocol event
types are applied to the events of the interface(s), which belong to the set
number 1.
- Filter set 2. The conditions related to System and Protocol event
types are applied to the events of the interface(s), which belong to the set
number 2.
- Edit System events. To select event
types relating to management of the test execution, or measurements which
can be carried out on the interface(s) under test (Clock, Dtmf, Delays).
- Edit Protocol events. To select event
types or field values according to the defined protocol stack, and the
possible decoding layers.
Filter set display area. The configuration of each filter set is
displayed.
"*" indicates that the numbered interface is part of the related set.
|
