ISDN signalling behaviour: Responder
Note: The items marked (emu) are relevant to the Q931 emulator
behaviour.
Accept incoming
calls (emu). Configuration of the Responder behaviour.
IE(s)... Optional specification of IE which must be included in
the incoming SETUP message for the call to be accepted.
Incoming call rejected
Call clearing (emu). With the following step in sequence:
- Send RELEASE COMPLETE... Access
to editing the attached buffer of IE(s).
Message transmission if validation
 No.
The related message will not be sent.
No response to incoming SETUP (ETSI 5.2.2a behaviour). Yes.
The message will be sent in sequence.
Response to incoming SETUP (ETSI 5.2.2b behaviour).
Incoming call accepted - Call
establishment
With the following steps in sequence:
- Send message. Validation of the transmission of the related message.
- No.
The message will not be sent.
- Yes.
The message will be sent in sequence.
- If no SC. Only for SETUP ACK.
The message will be sent in sequence only if the Sending Complete IE is
not present in the incoming SETUP.
- Send SETUP ACK... (emu) Message transmission if validation.
Access to editing the attached buffer of IE(s).
- Send CALL PROC... (emu) Message transmission if validation.
Access to editing the attached buffer of IE(s).
- Send PROGRESS... (emu) Message transmission if validation.
Access to editing the attached buffer of IE(s).
- Send ALERTING... (emu) Message transmission if validation.
Access to editing the attached buffer of IE(s).
- Delay before CONNECT. Delay before sending the CONNECT message
(if to be sent), starting from the reception of the incoming SETUP message.
An empty field means an infinite value of time.
If the Outgoing call active source is used, the delay is before the generation of the
outgoing SETUP.
- Send CONNECT... Message transmission after delay.
Access to editing the attached buffer of IE(s).
Establishment source. Source to be connected in the switched B
channel(s) during the establishment state of the communication:
| |
None |
No data source connected. |
| |
Loop |
Data echoed TD-RD. |
| |
Handset |
To use the telephone handset (Speaker + Micro) connected to the HANDSET
connector.
A Cofidec resource is automatically connected and used. |
| |
Analog 1 |
Analog Input/Output 1 available on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type. |
| |
Analog 2 |
Analog Input/Output 2 available on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type. |
| |
BERT 511 |
Bit error rate test - 511 bits pattern. |
| |
BERT 511+ |
Bit error rate test - 511 bits pattern with error counter details. |
| |
BERT 2047 |
Bit error rate test - 2047 bits pattern |
| |
BERT 2047+ |
Bit error rate test - 2047 bits pattern with error counter details. |
| |
BERT 2**15 |
Bit error rate test - 32767 bits pattern. |
| |
BERT 2**15+ |
Bit error rate test - 32767 bits pattern with error counter details. |
| |
TRANSIT |
TRANSIT interface with selection of the used TS's. |
| |
TRANSDATA |
TRANSDATA interface with automatic TS switching from/to the current
interface. |
| |
Cofidec 1 |
Digital input/output of the Cofidec 1. |
| |
Cofidec 2 |
Digital input/output of the Cofidec 2. |
| |
Byte-TS /Wav |
Byte-TS
or wav file selected
from a choice list.
64 Kbits data source (as speech, ...). |
Source selection. For some data source type, a complementary
selection area must be accessed.
-
- Related topic:
- Q931 Simulator: sources in
Time-Slots
- ISDN Simulation: BERT source
operation
Incoming call accepted - Active state
Default behaviour. with the specification of the active source to be
connected and the data state duration parameters.
- Connect... active source. Source to be connected in the switched B channel(s)
during the active state of the communication:
- Data state duration. If this duration expires, the call is
automatically cleared.
An empty field means an infinite value of time.
Downloaded
behaviour. The active source to be connected and
the data state duration can be defined in the User-User IE of the
incoming SETUP by a character string under the following conditions:
- string structure: <ACTIVE SOURCE > <DURATION> with uppercase charracters;
the both fields are separated by one SPACE character.
- The string is placed at the beginning of the "User information" field. It may
be followed by comments, provided that a * character separator is added.
- [d] optional data state duration: If this duration expires, the call is automatically
cleared.
- OUTj, COMj as outgoing communication n° j.
| |
User-User IE string |
Equivalence in Clarinet dialogue |
|
NONE [d] |
None |
|
LOOP [d] |
Loop |
|
HANDSET [d] |
Handset |
|
ANALOG1 [d] |
Analog 1 |
|
ANALOG2 [d] |
Analog 2 |
|
BERT9 [d] |
BERT 511 |
|
BERT9+ [d] |
BERT 511 + |
|
BERT11 [d] |
BERT 2047 |
|
BERT11+ [d] |
BERT 2047 + |
|
BERT15 [d] |
BERT 2**15 |
|
BERT15+ [d] |
BERT 2**15 + |
|
TRANSIT n [d] |
TRANSIT <TSn> |
|
TRANSDATA [d] |
TRANSDATA |
|
COFIDEC1 [d] |
Cofidec 1 |
|
COFIDEC2 [d] |
Cofidec 2 |
|
X25DATA [d] |
Data x25 simulator |
|
PROGRAM [d] |
Data user program |
|
OUTj [d] |
Outgoing call w/o TS switching |
|
COMj [d] |
Outgoing call with TS switching |
Send INFORMATION... An optional sequence of INFORMATION messages can be
automatically transmitted during the Active state.
Incoming call accepted - Call clearing
With the following steps in sequence:
- If normal clearing, Send DISC/RELEASE. Message transmission, depending on which party clears
the call.
Access to editing the IE buffer attached to the DISCONNECT message.
- If resource unavailable, Send DISC/RELEASE.
Message transmission if resource unavailable (as
channel or data source).
Access to editing the attached buffer of IE(s).
Copy/Paste functions
The Copy ISDN IE buffer and Paste
ISDN IE buffer functions allow to duplicate
the contents of a particular message to an other one (in the same profile or a different
one).
| 