QSIG signalling behaviour: Communication

Starting delay. Initial waiting time-period between the starting of the execution of the profile and the launching of the communication.
An empty field means an infinite value of time.

Execution number. Number of consecutive executions of the communication; must have a finite, non-null value.

Delay between exec. Delay between the end of the previous execution and the launching of the next execution of the communication.

Call establishment. With the following steps in sequence:

  • User indication. Character string included in a traffic event generated at the beginning of each execution of the communication.
  • Send SETUP... Message transmission.
    Access to editing the attached buffer of IE(s).
  • Send INFORMATION... An optional sequence of INFORMATION messages can be automatically transmitted.

Active state. With the specification of the source to be connected and the duration.

  • Active source. See the choice list.
    Source to be connected in the switched B channel(s) during the active state of the communication.
  • Data state duration. If this duration expires, the call is automatically cleared.
    An empty field means an infinite value of time.

Call clearing. With the following step in sequence:

  • Send DISC/RELEASE... Message transmission, depending on which party clears the call.
    Access to editing the IE buffer attached to the DISCONNECT message.


Copy/Paste functions

The Copy QSIG IE  buffer and Paste QSIG IE buffer functions allow to duplicate the contents of a particular message to an other one (in the same profile or a different one).


Choice list of data sources

      None No data source connected.
Loop Data echoed TD-RD.
Handset To use the telephone handset (Speaker + Micro) connected to the HANDSET connector.
A Cofidec resource is automatically connected and used.
Analog 1 Analog Input/Output 1 available on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type.
Analog 2 Analog Input/Output 2 available on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type.
BERT 511 Bit error rate test - 511 bits pattern.
BERT 511+ Bit error rate test - 511 bits pattern with error counter details.
BERT 2047 Bit error rate test - 2047 bits pattern
BERT 2047+ Bit error rate test - 2047 bits pattern with error counter details.
BERT 2**15 Bit error rate test - 32767 bits pattern.
BERT 2**15+ Bit error rate test - 32767 bits pattern with error counter details.
TRANSIT TRANSIT interface with selection of the used TS's.
TRANSDATA TRANSDATA interface with automatic TS switching from/to the current interface.
Data user program To enable the use of the Data user program as specified in the Data User Program panel.
Cofidec 1 Digital input/output of the Cofidec 1.
Cofidec 2 Digital input/output of the Cofidec 2.
Data X25 simulator To enable the use of the X25 call simulator as specified in the Data Call simulator panel.
Byte-TS /Wav Byte-TS or wav file selected from a choice list.
64 Kbits data source (as speech, ...).
Data FR simulator To enable the use of the Frame Relay call simulator as specified in the Data Call simulator panel.
Data IP simulator To enable the use of the IP call simulator as specified in the Data Call simulator panel.
PESQ Wav file selected from a choice list (64 Kbits data source).
PESQ measurement is carried out on the Tx/Rx data flows at the end of the profile execution according to the following settings:
  • Analog properties set in the Protocol filter defined within the profile
  • configuration file set as WI_ANALOG by Clarinet-Init

Source selection. For some data source type, a complementary selection area must be accessed.

 

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04