How to simulate V5.1 - AN side over E1 interface
Simulation of a V5 AN equipment is one of the features of the Clarinet
Run-Time.
Connecting the unit
The Clarinet Book USB E1/T1 which simulates the AN side in front of a
LE, uses the B port "From LE"
.
The Clarinet-Book can be connected to the E1 interface in:
Creating the profile for V5.1 AN simulation
A new profile can be created with the Wizard from the Template list by
selecting:
- Profile->New->V5......See: building
- Profile with a description including ISDN, Simu, AN, PH=E1 SL=V5.1
- Filter with a description including SL= V5
Example using the wizard:
- ProfileèNewèV5.xèv51_simu_an_e1.acpèFilter?èv5.acf
Profile resulting from the wizard is ready for monitoring in the C-channels
over TS 16 and 15
- Modifications to apply to the profile about physical interface:
- E1 options:
CRC4 multi-frame is normally used over V5 (selected by default ).
Deselect
it if not used (Interface SpecsèLinkèOptions).
- Modifications to apply to the profile about PSTN signalling:
- Changing the dialed number: Generator / Comm1 / Edit / Called Party
Number/Coding
Saving the profile under a new name:
- ProfileèSave
asèfilename.acp.
Running the profile
To launch the profile:
- Select Profile->Run or click over
. It allows to select the name of profile. See Running
a profile
- The window of the Event-Editor is automatically opened
To stop the profile
- Click over
See: Stopping
- The window of the Event-Editor is automatically close
Troubleshooting over PRI
- No messages displayed on the Event-Editor windows. Check if the Alarms
line have an indication such as ' -+ FL' or '++FL' meaning that no
signal is detected.
- The protocol messages are displayed on the wrong directions: the E1 pair connected to the A and B port are the reverse side.
| 