Tutorial

Content:

• ISDN application
• SS7 application
• Trunk E1/T1 application
• ATM application
• V5 application
• Vseries application
• Frame Relay application
• X25 application
• IP application
• VOIP application
• Editing the events

ISDN application

Principle of Clarinet-system

• Framework (slides)

Setting up the configuration

• Installing Clarinet System
• Automatic Clarinet Loader
• Selecting the Clarinet Program
• Configuration and troubleshooting
• Test of Clarinet_Book
• Listing my Clarinet software configuration

Editing the ISDN events

• General
  • Editing an event file
  • Sample of event file: BRI, PRI...
  • Find a message by F3
  • Print and copy events
• Display conditions
  • Filter according to a string
  • Filter by level
  • Change the decoding mode
• Selecting events by Filter conditions
  • Filter by type of messages
  • Filter by value of a field

Monitoring BRI

• Monitor ISDN-BRI over S-T Bus or U 2B-1Q
• Resources of Clarinet BRI interface (slides)

Monitoring PRI

• Monitor ISDN-PRI over E1 or T1
• Resources of Clarinet BRI interface (slides)

Advanced monitoring

• Monitor content of B channel
  • Monitor BOP protocol (X25, FR, PPP...) over one B channel
  • Monitor voice/tones over one B channel
  • Monitor digital content of voice over B channel and generate Byte-TS
  • Monitor digital content of voice and generate wav files
  • Monitor digital content of voice and generate QoS events

Simulation

• Simulate one ISDN basic call as a User to the Network over S-T bus, U2B1Q
• Simulate one ISDN basic call as a Network  to the User over S-T bus, U2B1Q
• Simulate one ISDN call as a User to the Network over E1, T1
• Simulate one ISDN call as a Network to the User over E1, T1
• Advanced simulator
  • Reply continuously to incoming SETUP
  • Add more calls to the simulation
  • Define a traffic simulation
  • Add / modify IE in the SETUP
  • Manage calls timing with manual commands
  • Send messages (RESTART, FACILITY) with manual commands
  • Select the TS number from the Channel ID
  • Transmit / Receive DTMF tones over one B channel of an outgoing call
  • Transmit / Receive DTMF tones over B channel of an incoming call
  • Transmit DTMF tones over B channel of any incoming call
  • Connect the Handset over one B channel of an outgoing call
  • Connect the Handset over one B channel of an incoming call
  • Transmit / Receive Byte-TS / Wave file over ISDN interface
  • Connect the Handset to the B channel during establishment time
  • Measure G821 BERT over one B channel
  • Connect the Transdata to the B channel
  • Connect the Transit of PRI interface to the B channels
  • Trig Outgoing calls from Incoming calls
  • Simulate X25 over the D channel

How to test SS7?

• Monitor SS7 protocol over two TS's of E1 or T1
• Advanced monitoring:
  • Listen to voice/tones over one B channel
  • Monitor digital content of voice over one B channel and generate wav files
• Simulate an SS7 call over E1,  T1
• Advanced simulator
  • Add more calls to the simulation
  • Add / modify parameters in the IAM
  • Manage timing calls with manual commands
  • Define a traffic simulation
  • Send messages (CONTINUITY...) with manual commands
  • Reply continuously to incoming IAM
  • Connect the Handset to one voice channel
  • Connect DTMF tones over one voice channel

How to test Trunk E1/T1 ?

• Monitor HDLC frames over Trunk E1 / T1
• Advanced monitoring:
  • Monitor CAS 
• Simulate BERT over E1 / T1 trunks 
• Advanced simulation:
  • Simulation of  Loop: selection of  TS loop Transmit to Receive
  • Simulation using TRANSIT: selection of  TS transferred to TRANSIT
  • Simulate CAS with manual commands
  • Aggregate TSs for simulation of n x 64k

How to test ATM ?

• Monitor PDUs over STM1/E3 interface
• Advanced monitoring:
  • Monitor IP over STM1 
• Simulate Q2931 over STM1
• Advanced simulation:
  • Simulates Frame Relay over STM1

How to simultaneously test SS7 and ISDN

• Monitor SS7 and ISDN over E1 or T1
• Simulate an SS7 and ISDN call over E1,  T1

How to test V5?

• Monitor V5 over a single E1
• Advanced monitoring:
  • Monitor V5 protocol over a set of  E1
• Simulate one  PSTN call from a  V5.1 AN over a single E1
• Simulate basic calls from a V5.2 AN
• Simulate basic calls from a V5.2 LE
• Advanced simulator
  • Simulate V5.2 protocol over a set of  E1
  • Add more calls to the simulation
  • Simulate PSTN calls in responder mode only from a V5.2 LE
  • Manage timing calls with manual commands
  • Define a traffic simulation

How to test Vseries ?

• Monitor HDLC over V24
• Advanced monitoring:
  • Monitor HDLC over V11 at 8 Mbits/s
• Simulate BERT over V24
• Advanced simulation:
  • Simulates protocol

How to test Frame Relay?

• Monitor Frame Relay
  • over V24
  • over E1/T1
  • over ATM
• Simulate Frame Relay User side
  • over V24
  • over E1/T1
  • over ATM

How to test X25/X75?

• Monitor X25 
  • overV24
  • over E1/T1
  • over ATM
• Simulate X25 DTE
  • over V24
  • over E1/T1
  • over ATM

How to test IP?

• Monitor IP over Ethernet
• Monitor PPP & IP over V24
• Simulate IP over Ethernet
• Simulate IP over V24

How to test VOIP?

• Monitor H323 over Ethernet
• Monitor SIP over Ethernet
• Advanced monitoring:
  • Monitor voice and generate wav files
  • Monitor voice and generate QoS events
  • Remove RAS decoding over wrong UDP port
• Simulate an endpoint H323 over Ethernet
• Simulate an endpoint H323 over Ethernet in Fastart mode
• Simulate a SIP User-Agent over Ethernet
• Simulate SIP User-Agent with Proxy over Ethernet
• Advanced simulator
  • Edit ASN1 content of the messages
  • Add / modify parameters in the SETUP of outgoing calls
  • Add more outgoing calls
  • Reply continuously to incoming SETUP
  • Add / modify parameters in the H225 messages replying to incoming calls
  • Modify fastart in the H225 messages replying to incoming calls
  • Manage timing calls with manual commands
  • Define a traffic simulation

How to edit the events resulting from acquisition

• General
  • Editing an event file
  • Samples of event file
  • Find a message by F3
  • Print and copy events
• Display conditions
  • Filter according to a string
  • Filter by level
  • Change the decoding mode
• Selecting events by Filter conditions
  • Filter by using Filter Set
  • Filter by selecting type of messages
  • Filter by selecting values of a field

Miscellaneous

• Editor dialogue rules

How to test XX ?

• Monitor XX over
• Advanced monitoring:
  • Monitor protocol
• Simulate XX over
• Advanced simulation:
  • Simulate protocol

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map

updated:  27-Feb-04